IPC Mondeo MK4 Mileage reset problem

[sccsltd]

Hi Guys.

I have a prefacelift Mk4 mondeo with Motrals moded ipc, i reset the mileage it was at 999980 and got stuck, it reset to 000000 sucessfuly but once i drove the car it does not increase?
i have tried setting the mileage to 1,10,100,50000,105000 and nothing just the error below, so ive waster a credit now as its stuck on 000000 any ideas before i resort to reflashing the eeprom manually?

SBL check done.
Programming Request Done.
SEED Security Passed.
Loading SBL...
SBL Loaded.
Secondary Bootloader Initialized correctly.
Detecting state ...
Programming Request Done.
SEED Security Passed.
Mileage write error.
Code 0x:49



Module Name: IPC
Network: MS-CAN Protocol: GGDS

F113 ECU Delivery Assembly Number BS7T-10849-XF
F121 ECU Software #3 Part Number CS7T-14C026-ED
F124 ECU Calibration Data #1 Number CS7T-14C026-CD
F162 Software Download Specification Version 0x02
F163 Diagnostic Specification Version 0x02
F188 Vehicle Manufacturer ECU Software Number CS7T-14C026-CD
F191 Vehicle Manufacturer ECU Hardware Number BS7T-14C226-CB
F18C ECU Serial Number UKR52R97N

[kroligoff]

After reset , try drive one-two kilometers and try set again