UCDS Forum

Download the required files from https://www.fordtechservice.dealerconne ... roduct=IDS
fill files into the vbf loader as you can see in the attachment, select correct CAN Bus (HS3) and car and thats it...

Devs already found a fix how to update to the correct one?

as2222usThank you for the explanation i managed to downgrade! fixed my issue.Now i just have to find how to get my adaptive headlights to function again and how to get the sound from the parking sensors back from my speakers and not the small speaker in the steering column.
Any idea's on how to fix this?

You can try to restore the original module configuration from AsBuilt data either by UCDS or by ForScan...
Have you upgraded the BCM?

There was a FSA and the dealer updated the HCM and the BCM.

What's changed in testversion 009?

I have returned to the original asbuilt values as downloaded from ford motorcraft services. So now the onlything left is the sound from the parking sensors that are coming from the internal speakers.
thanks for all the help
I did not upgrade the BCM

Hey dododude,

good to hear. Have you identified the module(s) for the parking sensors? May be there is also some configuration in other modules such as the bcm...
Good Luck!

Andreas

dododude писал(а):I have returned to the original asbuilt values as downloaded from ford motorcraft services. So now the onlything left is the sound from the parking sensors that are coming from the internal speakers.
thanks for all the help
I did not upgrade the BCM

BCM is updated together with the HCM at the dealer.

The behaviour of the LED headlights is perfectly normal...

So only the PDC is left

RPM Red Line:
720-04-02 xxxx xAxx

My friend JMR figured it out.

DanMc85 писал(а):RPM Red Line:
720-04-02 xxxx xAxx

My friend JMR figured it out.

For a car (model / year) this information?

Indeed!

Mr.Pum@ писал(а):

DanMc85 писал(а):RPM Red Line:
720-04-02 xxxx xAxx

My friend JMR figured it out.

For a car (model / year) this information?

It works for Ford Mondeo 5 MY14 Titanium.
But if you want to activate the red line by UCDS you should use manual entering configuration.
For unknown reasons the lower tetrad of the last byte DE03 is not parsed in the parameter list of DE03. May be in the future Krolligoff will add an additional parameter into DE03 list:

RPM Red Line:
A - Enabled
0 - Disabled

After my request to Krolligoff , he has extended the parameter list for IPC DE03.
So, you will have the opportunity to adjust the redline in version 009.
Take a look at my screenshot.

Can we try the new build, please?

mikele писал(а):

Mr.Pum@ писал(а):

For a car (model / year) this information?

It works for Ford Mondeo 5 MY14 Titanium.
But if you want to activate the red line by UCDS you should use manual entering configuration.
For unknown reasons the lower tetrad of the last byte DE03 is not parsed in the parameter list of DE03. May be in the future Krolligoff will add an additional parameter into DE03 list:

RPM Red Line:
A - Enabled
0 - Disabled

RedLine_1.png

RedLine_2.png

RedLine_3.png

Good stuff... which model instrument cluster do you have? DS7T Series or FS7T Series?