UCDS Forum

update software to 1.22.001

but can't connect to ucds device...
why?

thirty писал(а):update software to 1.22.001

but can't connect to ucds device...
why?

You have to update adapter`s firmware to 11.

yes right ，must be update 10 to 11

shihkai писал(а):yes right ，must be update 10 to 11

where can get new firmware ?
use old ucds software get adapter.rar. unpacked to get adapter.fmw.
after update,still 10....

-----Log-----

System info from adapter recieved.
CRC - 004A1775
Flashing firmware procedure started...
SelfProgramming Initialisation OK!
SelfProgramming Erase Memory OK!
SelfProgramming Write Memory Started...
SelfProgramming Write Memory OK!
SelfProgramming New Flash Initialisation...
Wait...!
SelfProgramming OK! FW Version: 10

i use new software update firmware get error!

CRC - 004A1775
Flashing firmware procedure started...
SelfProgramming Initialisation OK!
SelfProgramming Erase Memory OK!
SelfProgramming Write Memory Started...
SelfProgramming Write Memory OK!
SelfProgramming New Flash Initialisation...
Unrecognized error! Contact with developer...
Error code: FF

-_-

the soft is still working in progress，wait couple week