Страница 1 из 1
Problems v. 2.0.003.003
Добавлено: 02 мар 2018, 00:39
chrishatred
Since i installed v. 2.0.003.003 i can not read the settings from ACM module in Direct Configuration.
I get "Diagnostic Request Error 0x00"
The same when i want to write the configuration to PAM module.
Reading PAM is OK, writing is not possible. Same Error lilke PAM.
The last version worked fine..... no problems.
Re: Problems v. 2.0.003.003
Добавлено: 02 мар 2018, 04:35
DanMc85
for what vehicle in Direct Config?... you left that part out.
Re: Problems v. 2.0.003.003
Добавлено: 02 мар 2018, 12:23
chrishatred
Oh sorry - Focus ST MK3.5 (04/2017)
Re: Problems v. 2.0.003.003
Добавлено: 02 мар 2018, 14:41
Ranger2016
Hello,
after the update, I can not start UCDS anymore. He tells me that I no longer have tokens!
Re: Problems v. 2.0.003.003
Добавлено: 02 мар 2018, 19:33
Manice
Hi
Has there been a change in the way UCSD saves config-files?
After upgrading to v. 2.0.003.003 I can not read config files saved by previous version.
I get a error saying "Sorry opening file nor for this module, please open correct"
If i read from module and the save config-file the it reads it all right.
Rgds
Manice
Re: Problems v. 2.0.003.003
Добавлено: 03 мар 2018, 01:36
t-k
You must change date in file.
MY14 to MY15.
Re: Problems v. 2.0.003.003
Добавлено: 04 мар 2018, 11:29
cliner
Just confirm,No communication with modules on new version UCDS software. Impossible to read Direct Configuration,Update Wizard on vehicle(Focus ST-2017),last version works fine.
Re: Problems v. 2.0.003.003
Добавлено: 05 мар 2018, 12:14
leszcz33
cliner писал(а):Just confirm,No communication with modules on new version UCDS software. Impossible to read Direct Configuration,Update Wizard on vehicle(Focus ST-2017),last version works fine.
Robią FIXa , miał być w weekend
. Możesz zmienić datę w pliku z MY14 na MY15 czasami tez na odwrót .
Re: Problems v. 2.0.003.003
Добавлено: 05 мар 2018, 20:03
cliner
Co ma piernik do wiatraka..on nie czyta modułów....żadnych...
Re: Problems v. 2.0.003.003
Добавлено: 06 мар 2018, 00:28
t-k
U mnie czyta.
Re: Problems v. 2.0.003.003
Добавлено: 06 мар 2018, 13:47
cliner
Ford Focus ST-2017-ACM,BCM,IPC czyta z Direct Configuration?Który hardware adaptera masz?
Re: Problems v. 2.0.003.003
Добавлено: 06 мар 2018, 17:57
mtronic
Здравствуйте.
Мой UCDS не запускается. Отображается ошибка, как на картинке, и сбрасывается программное обеспечение. Вы можете помочь?
Re: Problems v. 2.0.003.003
Добавлено: 06 мар 2018, 21:37
dragunov
English?
Re: Problems v. 2.0.003.003
Добавлено: 07 мар 2018, 10:33
mtronic
My UCDS does not start. An error is displayed, as in the picture, and the software is reset. You can help?