UCDS Forum

Hi,
I think that ucds misread central configurations and does not change what is needed

I want to disable TPMS but the changes even saved are not successfull

when I read the central configuration by forscan it is still "TPMS with tire sensors4 wheels" and I still have an error in bcm refers to TPMS

I tried to change by forscan but it does not want to save the central configuration

Has anyone any ideas how to do it?

Need save central configuration in both modules IPC and BCM, on MK7 general module is IPC

when I click "Write asbuilt to IPC" I have error

vin 3fadp4gx0em243857

Sorry for this issue, current added US fiesta to support.
Send to you PM.

thanks for your help
but today I had to give the car back to the owner
I will test it later

Hello,e

I'm trying to disable TMPS on Focus 3 2015... I made some modification in BCM (tyre presure front and rear: 0, Auto check: OFF) but i have a problem with IPC... Or maybe I'm doing it all wrong?

1. asbuilt data - BCM 101 Tyre Pressure Mode System set to 01 (without)
2. write to BCM
3. write to IPC (backup)
4. focus 3 - spec. procedures - ABS - Initialize Module