Correction of the BCM dead module after faulty or incomplete
Добавлено: 28 окт 2018, 22:15
I tested Elm cable with ElmConfig and the writing ended in error.
I wrote Asuilt Data to BCM.
There may have been a voltage drop or a transmission error.
The unit was dead and thus the entire car.
If it happens to someone, a little help can be helpful ...
I wrote Asuilt Data to BCM.
There may have been a voltage drop or a transmission error.
The unit was dead and thus the entire car.
If it happens to someone, a little help can be helpful ...