UCDS Forum

Hi all,

could you anybody help me what is the correct calibration for this car - see attachments,please.

It has new Powershift mechatronic that has been programmed but no fork movent at all. Original one was totally fried
I have the current level of Ford IDS in my hands with online access to calibrations.
I am affraid it has been programmed in a weird way recently.
Thank you for any hint.

Below is the IDS protocol >

Software version : IDS-113.03
Vehicle: GALAXY\S-Max
Engine Type: Duratorq-Turbo Diesel Common Rail Injection StgV
Capacity: 2.0L
Transmission: Powershift
Odometer: 190086km
(RO): BADTRANNYE
(VIN): WF0SXXGBWSAR88797

Strategy : BG91-
Filename : BG91-14C204-CN
Module Part Number :
(ABS) Part Number = BG91-2C405-FB
(ABS)_FILENAME = BG91-14C036-FB
(ABS)_HARDWARE_NUM = AG91-14C227-FA
(ABS)_CALIBRATION_FILENAME = BG91-14C037-FB
Standard Equipment Modules - Pass - (ABS)
Optional equipment Modules - Fail - (ACM)
Optional equipment Modules - Fail - (AHCM)
(BCMii) Part Number = BG9T-14A073-CD
(BCMii)_FILENAME = BG9T-14C094-AD
(BCMii) Software Part 1 (F108) = BG9T-14C403-AC
(BCMii)_HARDWARE_NUM = BG9T-14C245-CC
(BCMii)_CALIBRATION_FILENAME = BG9T-14C095-AD
Standard Equipment Modules - Pass - (BCMii)
Optional equipment Modules - Fail - (CCMii)
Optional equipment Modules - Fail - (CDP)
Optional equipment Modules - Fail - (CMR)
Standard Equipment Modules - Fail - (DABM)
Standard Equipment Modules - Pass - (DDM)
Optional equipment Modules - Pass - (DSM)
Standard Equipment Modules - Fail - (HCM)
Optional equipment Modules - Pass - (HVAC)
(IPC) Part Number = BS7T-10849-VD
(IPC)_FILENAME = BS7T-14C026-CD
(IPC)_HARDWARE_NUM = BS7T-14C226-CB
(IPC)_CALIBRATION_FILENAME = BS7T-14C026-CD
Standard Equipment Modules - Pass - (IPC)
Optional equipment Modules - Fail - (IPM-A)
Optional equipment Modules - Fail - (NAV)
Optional equipment Modules - Fail - (PAM)
Optional equipment Modules - Fail - (PBM)
(PCM) Part Number = BG91PN
(PCM)_FILENAME = BG91-14C204-CN
Standard Equipment Modules - Pass - (PCM)
Standard Equipment Modules - Pass - (PDM)
Optional equipment Modules - Pass - (PSCM)
Standard Equipment Modules - Pass - (RCM)
Optional equipment Modules - Fail - (RFA)
Optional equipment Modules - Fail - (RGTM)
Optional equipment Modules - Fail - (RHVAC)
Optional equipment Modules - Pass - (SASM)
Optional equipment Modules - Fail - (SOD-L)
Optional equipment Modules - Fail - (SOD-R)
Optional equipment Modules - Fail - (SRM)
(TCM) Part Number = AG91-7Z369-AM
(TCM)_FILENAME = AG9R-7J104-TB
(TCM) Software Part 1 (F108) =
(TCM)_HARDWARE_NUM = 8M5R-14F085-AD
(TCM)_CALIBRATION_FILENAME = AG9R-7J105-TB
Optional equipment Modules - Pass - (TCM)
Optional equipment Modules - Fail - (TRM)
Optional equipment Modules - Fail - (VDM)

Use VBF Loader
SBL: 8G91-7J244-AD
#1:AG9R-7J104-TB
#2:AG9R-7J105-TB

kroligoff писал(а):Use VBF Loader
SBL: 8G91-7J244-AD
#1:AG9R-7J104-TB
#2:AG9R-7J105-TB

Thank you for hint and for your time man !
I did it this way but unfortunately TCM still does not shift for me at all.
There must be something wrong with the central configuration IMHO