Ford Connect 2014 Passenger Airbag deactivate?
Добавлено: 11 май 2019, 23:17
Hi, can I deactivate the passenger airbag for Ford Connect 2014?
The passenger airbag was disassembled after the crash.
In the RCM module, some things have been disabled.
The airbag indicator light is still on the IPC and errors remain.
What to do? The passenger airbag is removed.
Thanks.
The passenger airbag was disassembled after the crash.
In the RCM module, some things have been disabled.
The airbag indicator light is still on the IPC and errors remain.
What to do? The passenger airbag is removed.
Thanks.
Код: Выделить всё
Module Name: RCMNetwork: HS-CAN Protocol: GGDS
DTC Error read
DTC Errors: 4
B0010: Passenger Frontal Stage 1 Deployment Control
Failure Type 0x13:
Circuit Open
Status 0x8B:
Warning lamp ON (MIL)
Fault is currently present
B0011: Passenger Frontal Stage 2 Deployment Control
Failure Type 0x13:
Circuit Open
Status 0x8B:
Warning lamp ON (MIL)
Fault is currently present
B1413: Driver Frontal Restraints Sensor
Failure Type 0x93:
No Operation
Status 0x8B:
Warning lamp ON (MIL)
Fault is currently present
B1193: Crash Event Storage Full and Locked
Failure Type 0x00:
No Additional Failure Type Information for this (DTC)
Status 0x8B:
Warning lamp ON (MIL)
Fault is currently present