UCDS Forum

Today i wanted to use ucds for the first time on my Focus 3 1.6 tdci.

after trying to read as-built configuration the car turns off the ignition and ucds says ''no seed''

how can i fix this?

"the car turns off the ignition "

the ignition must be ON during reading as-built data

zaqik писал(а):"the car turns off the ignition "

the ignition must be ON during reading as-built data

Yes i know, i turned on the ignition but the car shuts the ignition off.

ucds says ''seed incorrect''

Also in the pcm menu it says PCM not recognized

car shuts the ignition off ... AUTOMATICALLY ???
do you have keyless? and type?

(assumptions: key and battery are OK)

zaqik писал(а):car shuts the ignition off ... AUTOMATICALLY ???
do you have keyless? and type?

(assumptions: key and battery are OK)

After turning on the ignition and trying to read the as-built data the ignition turns automaticly off.

The car has keyless entry and keyless start.

Keys and battery are working perfectly ( the car was build May this year)

probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

zaqik писал(а):probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

Thanks! i hope so.

nielsicq писал(а):

zaqik писал(а):probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

Thanks! i hope so.

Oh....
If you have FF3 1.6 TDCi - i think that is porblem
On our marke not sells 1.6 TDCi engine. =(

All i need is save IDS seans with this car.....

Can you help me? I can add support for this type of engine and FF3 asbuilt

hello.
I I have IDS, you need to send a diagnostic session?
Ask me what you need and in a few days locate a 1.6 tdci to collect the data.
Darkleo skype let me know what you need

Ok ill connect with you

oscarboiro писал(а):hello.
I I have IDS, you need to send a diagnostic session?
Ask me what you need and in a few days locate a 1.6 tdci to collect the data.
Darkleo skype let me know what you need

Ok ill connect with you

hi i send my session data to darkleo (econetic 105BHP)

i also can get manny other models on request

oscarboiro and nielsicq

can you save and send to DarkLeo sessions from FF3 1.6EB 150 and FF3 1.6 EB 180?

updating 1.6 EB 150->180 would be GREAT!!!

nielsicq Hi! We need FF3 2.0 petrol 163hp VIN with latest BCMii and PCM part numbers begining from DV6T...

Hi nielsicq.Could you find the FOCUS II TDCi 2.0 in TAIWAN?

funkynet писал(а):Hi nielsicq.Could you find the FOCUS II TDCi 2.0 in TAIWAN?

Sorry i dont understand the question

Niels i remember about your. And start making support for your car.