Enabling ACC in S-Max 2016

[robert]

I have problems with enabling adaptive cruise control in S-Max 2016 2.0 diesel.
When following these instructions:
https://wiki.ucdsys.ru/doku.php?id=mondeo_5:m5ccm

everything works OK until modification of ABS module - when setting ACC and ACC FSA to active, I'm getting error when writing configuration. Writing configuration works only when setting ACC inactive and ACC FSA active, like to on the picture below:

works_ok_edited.jpg

Later, when reading errors, additionally I'm getting two following errors:
1)

error.jpg

2)

error_CCM.jpg

Help me please. Anyone can send me his configuration with working ACC ?
Bottle of whiskey for anyone who successfully helps me

[Kingsammy]

Hello Robert,

i can help you. I know exactly 3 persons including me, who have successfully activated the ACC for a S-Max/Galaxy with Diesel Engine.
Are you from Germany? Do you speak german? I have written a short manual for activating ACC with UCDS in german language.
Otherwise i have to translate the correct approach for the ABS module.

[kroligoff]

You enbale CMbB - Active ?

[robert]

Hello Kingsammy and kroligoff,

Thank you for reply - I do not speak german very well, however I should not have any bigger problems with reading. Could you send me the manual then ?
Kroligoff, yes I had already CMbB active before modification - the only change after reading configuration I had to make, was to activate ACC - with ACC active writing configuration doesn't work :/

[Kingsammy]

1. Select ABS module from Direct Configuration.

2. With right mouse click on “*7 ECUConfiguration - DE01” select from context menu “Manual entering configuration”.

ABS.png

3. Now you have to change bit no. 32 to value 1 and bit no. 34 to value 1.

ABS_2.jpg

If one of the two mentioned bits have already value 1 then leave it.

4. Confirm with button “Ok”

5. Write configuration to ABS module with button “Write to module”

6. Clear all DTCs

Edit: Please give Feedback if it worked. Many thanks.

[robert]

Thank you - I'll give it a try as soon as possible and will let you know.
Up to now, I have compared the configuration I have ready out of my original “*7 ECUConfiguration - DE01” field with yours and they are completely different.
Here is the value from my config:
<DID ID="DE01">231233113C9722023000</DID>

[Kingsammy]

This is possible that your configuration is different from mine. That is no problem.

You have to change bit no. 32 and bitno. 34 to 1 for ABS module, as mentioned above. Give it a try.

[Kingsammy]

@ kroligoff
The following configurations of * 7: ECUConfiguration - DE01“ of ABS modul

DE01-4 „Automatic Cruise Control“ - Wert: Active
DE01-5 „Automatic Cruise Control Full Speed Assist“ - Wert: Active
DE01-6 „CmbB (Collision Mitigation by Braking) (High Speed, Long Range Detection)“ - Wert: Active

have influence on configuration adress 760-02-02.

DE01-4 „Automatic Cruise Control“ - Value 'Active' sets bit 48 to 1
DE01-5 „Automatic Cruise Control Full Speed Assist“ - Value 'Active' sets bit no. 49 auf 1
DE01-6 „CmbB (Collision Mitigation by Braking) (High Speed, Long Range Detection)“ - Value 'Active' sets bits no. 50 to 1

[robert]

Kingsammy, you're the real King ! Setting bit 32 to 1 helped to solve the problem. How have you found out that if I may ask ? Probably I would struggle a long time in order to find out it on my own. Where should I send the bottle of whiskey then ?
Kroligoff - I guess either UCDS app has to be adapted or there are different configurations needed for S-Max.

[robert]

And of course big thanks to both of you !

[Kingsammy]

@robert: Great news. Congratulations. You have to send the bottle of whiskey to germany
Edit: From which country you are from?

I also think that the UCDS Tool has to be updated.

[kroligoff]

Thanks. We added special configuration for SMax ABS (F2GC)

smax_abs_cfg.jpg

[Kingsammy]

That is great. Thank you very much. I can check it with the next UCDS Update if it works. Do you know when the next UCDS Update will be issued?

[Maagen]

Hi Kingsammy,

I am trying to to activate Adaptive Cruise control on my 2018 S-max. (150hp diesel)

I live in Denmark and I understand german language a little. Please can you send your short manual to me. (PM)

Thank you
Maagen

Hello Robert,

i can help you. I know exactly 3 persons including me, who have successfully activated the ACC for a S-Max/Galaxy with Diesel Engine.
Are you from Germany? Do you speak german? I have written a short manual for activating ACC with UCDS in german language.
Otherwise i have to translate the correct approach for the ABS module.