fiesta mk7 TPMS disable problem

[tomoff]

Hi,
I think that ucds misread central configurations and does not change what is needed

I want to disable TPMS but the changes even saved are not successfull

when I read the central configuration by forscan it is still "TPMS with tire sensors4 wheels" and I still have an error in bcm refers to TPMS

I tried to change by forscan but it does not want to save the central configuration

Has anyone any ideas how to do it?

[kroligoff]

Need save central configuration in both modules IPC and BCM, on MK7 general module is IPC

[tomoff]

when I click "Write asbuilt to IPC" I have error

vin 3fadp4gx0em243857

[kroligoff]

Sorry for this issue, current added US fiesta to support.
Send to you PM.

fiesta_us.png

[tomoff]

thanks for your help
but today I had to give the car back to the owner
I will test it later

[MarcinSalvage]

Hello,e

I'm trying to disable TMPS on Focus 3 2015... I made some modification in BCM (tyre presure front and rear: 0, Auto check: OFF) but i have a problem with IPC... Or maybe I'm doing it all wrong?

[zaqik]

1. asbuilt data - BCM 101 Tyre Pressure Mode System set to 01 (without)
2. write to BCM
3. write to IPC (backup)
4. focus 3 - spec. procedures - ABS - Initialize Module