Power Shift Calibration MISSING S-MAX 2010 2.0 Tdci

[Hack3d]

Hello friends,
In the past you helped me a lot with the right SBL and Calibration etc.
I now have the following problem.
I have replaced the PowerShift transmission in my car and have previously had the following gear in it.
Old PowerShift has a defect.

AV9R 7000 AB (OLD)
AWBA1 300810 074652

I have installed one
AV9R 7000 AE (NEW)
AWBC1 151211 031356

Now I wanted to program the transmission on the following car ....
FORD S-MAX 2.0 Tdci WA6 FL
VIN: WF0SXXGBWSAB66520

Problem .... TCM does not respond to the Poll or Updateing Wizard.

I need for the VBF Loader
SBL
Calibration
signal
Strategy

Anybody can help?

Thanks a lot

[kroligoff]

Latest for you
SBL:8G91-7J244-AD
#1: AG9R-7J104-TB
#2: AG9R-7J105-TB
#3: AG91-14C389-CB

After maybe need get from etis Direct Configration

[Hack3d]

Thanks a Lot!!!! Your best

What you Mean Maybe After etis direct Config?
You can Tell me?!

[firesanek]

If transmission new and tcm is empty, you need ids.
If tcm not empty, you need pcmflash and damp from your old tcm.

[Hack3d]

Hi,
Also..... i have an used TCM in this car. I have UCDS and IDS.
I load the Software from top to the tcm and the i can use ids?
Or why i can Unterstand?!

[firesanek]

If the TCM is already programmed and used on a different model of car, you will only PCMFlasher. PCMFlasher can read the dump from Your TCM and pour it into a new TCM. Or you can install your tcm module in the new transmission.

[Hack3d]

Latest for you
SBL:8G91-7J244-AD
#1: AG9R-7J104-TB
#2: AG9R-7J105-TB
#3: AG91-14C389-CB

After maybe need get from etis Direct Configration

Hi Kroligoff,
ist this the Software for the new TCM which is exchanged in the car?
Or is that the Old Software from the malfunction TCM, which is dismounted.

If you send me the new software from new TCM you can look afrter the old software? or the other way around

Best wishes

[Hack3d]

hello guys, so the gear is in its function and can be used by emergency rellease and Drive Formats and Reverse....
I only have the following problem.
The TCM reports that the selector lever is not enough energy for switches to B.
The selector lever is completely dark and can not be switched without emergency release.
PCM reports unknown signal received from TCM.
what could that be?!?!?
The transmission I could not boch the shift fork or the clutch train, he wants to have the selector lever.

Fuses are okay!
Has the selector leveler a fuse on any Position???