Help Reviving Dead Sync 3 APIM

[ben.bradley]

I tried flashing a newer calibration to my APIM and seem to have bricked it. Here are the files I'm trying to use to get it back, which were what was listed as the original files before I tried to upgrade:
SBL: GB5T-14G376-AA.VBF
File 1: GB5T-14G374-AF.VBF
File 2: GB5T-14G375-CA.VBF

UCDS will flash the SBL and File 1, but fails on File 2. Here is the log:
00:00:00:504: HW/SW part number: GB5T-14G371-CFC
00:00:00:509: Loading and prepare database...
00:00:02:944: Searching for SEED keys...
00:00:02:952: SEED Keys found.
00:00:05:130: Forced programming mode is started... Wait answer...
00:00:05:135: Prepare "Sleep all modules" to CAN_HS
00:00:08:719: Forced programming mode OK!
00:00:09:727: Requesting protected mode...
00:00:09:735: Protected mode granted!
00:00:09:889: Loading Secondary Bootloader...
00:00:09:987: Secondary Bootloader successfully loaded and initialized.
00:00:10:297: Erasing flash...
00:00:10:301: Erasing flash block 1 from 3 ...
00:00:10:509: Erasing flash block 2 from 3 ...
00:00:10:766: Erasing flash block 3 from 3 ...
00:00:16:425: Erasing flash finished.
00:00:16:431: Programming flash block 1 from 7 ...
00:00:16:584: Checking...
00:00:16:615: Programming flash block 2 from 7 ...
00:00:16:990: Checking...
00:00:17:045: Programming flash block 3 from 7 ...
00:00:17:088: Checking...
00:00:17:103: Programming flash block 4 from 7 ...
00:00:17:155: Checking...
00:00:17:174: Programming flash block 5 from 7 ...
00:00:43:292: Checking...
00:00:46:779: Programming flash block 6 from 7 ...
00:00:46:832: Checking...
00:00:46:843: Programming flash block 7 from 7 ...
00:00:46:867: Checking...
00:00:47:876: Programming flash block 1 from 1 ...
00:00:47:912: Block #1 programming failed.
00:00:48:917: Failed to programming flash! Error: Request Sequence Error [0x24]

Any advice on bringing the APIM back to life? Vehicle VIN: 1FAHP2H88GG119863 it is a 2016 Taurus.

[Ramper]

Flash your original files wil be back up and running

[ben.bradley]

Flash your original files wil be back up and running

The error is received when attempting to flash the original files. The update files I tried seemed to go through without error, but they bricked the APIM.

[ben.bradley]

Fixed by using GB5T-14G375-DA.VBF. APIM is working again.

[Benutzername]

Sounds good

whats the difference between DA and your original CA?