PDM file request Mondeo V

[Cruiser]

UCDS 2.0.003.001
Mondeo (Euro) [CD391] - 2015>

PDM Update failed!

Request listing of a set of working and downloadable files for a reprogramming.

Module part number: DG9T-14B533-CF


Thanks a lot.

[kroligoff]

Over VBF loader:

SBL: DG9T-14C111-AA
#1:DG9T-14C639-DC
#2:DG9T-14C108-AY

[Cruiser]

Thank you for the files.

I tried (with the VBF-Loader) and failed in the following way:

Sec.Bootloader: okay
DG9T-14C639-DC: 100%
then the programmer was unable to write the flash.

The module was thereafter for a while not "online" with the following messages in the VBF-Loader:

"Requesting Hardware part number...
Failed to recieve [sic] HW part number..."

When, after some while, the PDM (Passenger Door Module) was recognized again via the VBF-Loader, writing the flash did not work.

I believe we have a problem with the file versions used. I was for instance able to download

DG9T-14C639-DD
DG9T-14C108-AZ

but this did also not work with the Sec. Bootloader DG9T-14C111-AA.

From a xml-file I took this info which reflects my old file-set for the PDM:

Capture3.PNG

Unfortunately I no longer can download

DG9T-14C639-DA
DG9T-14F144-AD

to restitute my PDM to the old version.

Any ideas?

[kroligoff]

Try DA
SBL: DG9T-14C111-AA is correct

Try flash use Dead Mode and insert you part F113

[Cruiser]

Try DA
SBL: DG9T-14C111-AA is correct

Try flash use Dead Mode and insert you part F113

This worked: