Change visual aspect to original

[Julioton]

Hi.
Apply the visual aspect change from sync 3 (Ford Focus ST III 2017) to Lincoln according to WIKI UCDS (Config Block DE02 - DE02
Visual Design Variants). The problem is that now I want to return to the visual FORD ST aspect and I do not get the option. I only get the following options that appear on the drawin.

Can someone tell me how to return to the original aspect? The fact is that if under the ETIS data they come to me as Lincoln. I do not know how they would have been saved on the Ford server or how to fix it. I guess I did something wrong. Can someone help me?

[Julioton]

Nobody knows how to help me?
I have seen in Forscan forums that what is changed in APIM / SYNC3 is saved in the Ford server. That's why I can not go back to the original. I did not know and that's why I did not make a backup thinking that I could go back to the original. If someone can tell me how to return to the original I would appreciate it.
My car is Ford Focus ST 2017 EU

[larsmdk]

Nobody knows how to help me?
I have seen in Forscan forums that what is changed in APIM / SYNC3 is saved in the Ford server. That's why I can not go back to the original. I did not know and that's why I did not make a backup thinking that I could go back to the original. If someone can tell me how to return to the original I would appreciate it.
My car is Ford Focus ST 2017 EU

How did it look before?
Have not try in UCDS, but you can do it in forscan

7D0-03-01 xxxx-x1xx-xxxx ford standart visual design
7D0-02-01 xxxx-xBxx-xxxx ST boot screen
But if you go here https://www.motorcraftservice.com/AsBuilt you can finde what was from ford
I believe you ca enter this value also in direct configuration, the x needs of course to be the original values

Best regards

[Julioton]

Nobody knows how to help me?
I have seen in Forscan forums that what is changed in APIM / SYNC3 is saved in the Ford server. That's why I can not go back to the original. I did not know and that's why I did not make a backup thinking that I could go back to the original. If someone can tell me how to return to the original I would appreciate it.
My car is Ford Focus ST 2017 EU

How did it look before?
Have not try in UCDS, but you can do it in forscan

7D0-03-01 xxxx-x1xx-xxxx ford standart visual design
7D0-02-01 xxxx-xBxx-xxxx ST boot screen
But if you go here https://www.motorcraftservice.com/AsBuilt you can finde what was from ford
I believe you ca enter this value also in direct configuration, the x needs of course to be the original values

Best regards

Thank you!!! I'll try to see if it works

Best Regards

[larsmdk]

You can sent me the serialnumber if you have issue to finde the as-bulti data

[Julioton]

You can sent me the serialnumber if you have issue to finde the as-bulti data

In the link that you put Spain does not come out and therefore I can not find the AsBuild data.
My frame number is VIN: WF05XXGCC5HK19031
As soon as I can I make the changes in forscan and I'll tell you if it works. Even so if you can send me the AsBuild data I would also appreciate a lot.

best regards

[larsmdk]

Here is the info

[Julioton]

Here is the info

Many thanks!!!


Best regards

[Julioton]

Here is the info

Sorry to bother you. If it's not a problem for you, you can tell me all the options for
"7D0-03-01" xxxx-x?xx-xxxx
"7D0-02-01" xxxx-x?xx-xxxx ?

Best regards

[larsmdk]

Here is some more info

[Julioton]

Here is some more info

thank you very much!!

[Julioton]

Applied changes in ForScan. I already have the original visual appearance.