UCDS Forum

I Have Sync3 Nav which i updated from 2.2.16223 to 2.3 17109 and language pack as well as Nav maps and licence F6.1. After installing these I upgraded sync to 3.0.17276 but i could not install the V3.0 language pack or the map pack in the V3.0 package it gave error code :LST_ERR06 and would not start installing

after this the satnav became erratic not coming on when sync started up and displaying a warning that nav wasn't working and the pointer would freeze on screen and jump along the road sometimes not moving for miles the software i ended up listed in IVSU
JR3T-14G381-AJ 3.0.17276
JR3T-14G391-AD 3.0.17276
JL7T-14G391-AA 2.3.16284
JL7T-14G421-BA 2.3.12684
JL7T-14G422-BA 2.3.16284
JL7T-14G423-AA 2.3.16284

I managed to rollback to 2.2.16223 but i am unable to rollback the nav software or maps and i still have eratic nav operation when i try and install the original nav files i get error of LST_ERR07.
my software listed now is

HN1T-14G381-LF 2.2.16223
HN1T-14G391-AC 2.2.16132
JR3T-14G423-AA 3.017024
JL7T-14G421-BA 2.3.16284
JL7T-14G422-BA 2.3.16284
the autoinstall file i used to try and install nav app and maps was one i edited but it wouldn’t start the install only errors

; Gen 3 - Assembly Update - Nav/EU - 17011

Item1 = License MAPS EU (2.2.17011)
Open1 = SyncMyRide\HB5T-14G424-BD.tar.gz
Item2 = Maps EU F4.5 (2.2.17011)
Open2 = SyncMyRide\HB5T-14G421-BD.tar.gz
Item3 = Nav Language Pack (2.2.17011)
Open3 = SyncMyRide\HB5T-14G422-BC.tar.gz

Options = Delay,AutoInstall


Is there anyway to reinstall the nav software and maps i started with and get satnav working as it should? Is it possible to carry out the rollback and install maps at the same time?

you should first install the nav language pack.
then the license and at last the map file

then it should work.

currently your grace note is still on JR3T-14G423-AA 3.017024
reinstall that one to 2.2

the maps and nac language can have a different version tham the others.

My Kuga is currently in service , but it still hav the navigation on 2.3 and the rest on 3.0
please review your installation of the navigation files

Keep in mind that the system requires a restart after each update, this takes about 30 minutes each time.
to shorten this reboot the system manually by pressing seek right and power at once until system reboots.
Them wait 5 minutes and you can contiue with next update

Carl писал(а):you should first install the nav language pack.
then the license and at last the map file

then it should work.

currently your grace note is still on JR3T-14G423-AA 3.017024
reinstall that one to 2.2

the maps and nac language can have a different version tham the others.

My Kuga is currently in service , but it still hav the navigation on 2.3 and the rest on 3.0
please review your installation of the navigation files

Keep in mind that the system requires a restart after each update, this takes about 30 minutes each time.
to shorten this reboot the system manually by pressing seek right and power at once until system reboots.
Them wait 5 minutes and you can contiue with next update

so my install file was changed to this i will try this and let you know how it goes.
removing gracenote i am able to do with the utility so that is not a problem

; Gen 3 - Assembly Update - Nav/EU - 17011

Item1 = GB5T-14G386-SC
Open1 = SyncMyRide\GB5T-14G386-SC.tar.gz
Item2 = Nav Language Pack (2.2.17011)
Open2 = SyncMyRide\HB5T-14G422-BC.tar.gz
Item3 = License MAPS EU (2.2.17011)
Open3 = SyncMyRide\HB5T-14G424-BD.tar.gz
Item4 = MAPS EU (2.2.17011)
Open4 = SyncMyRide\HB5T-14G421-BD.tar.gz

Options = Delay,AutoInstall

I removed gracenote first on its own and verified it was gone and after editing my install file again to remove the gracenote operation i tried and failed to install map language pack,licence,maps with the above error

I would upload the App, lanugage and Grace file in one step.
as a secind step the nav laguage file.
as third step license an maps flile.

please make it separately.
according to friends in the mondeo MK5 forum this works.

and I updated mine according to above mentioned step 1.
works fine this weekend I will do the Navigation

Carl писал(а):I would upload the App, lanugage and Grace file in one step.
as a secind step the nav laguage file.
as third step license an maps flile.

please make it separately.
according to friends in the mondeo MK5 forum this works.

and I updated mine according to above mentioned step 1.
works fine this weekend I will do the Navigation

tried and it failed again immediately with LST_ERR04 as soon as i tried installing nav voice

just to be sure , App, lanugage and Grace file were uploaded correctly?

for 2.3 Navigation try these downloads

Languagepack
License
Map

so you are suggesting i take it up to 2.3? ideally i want to take it back to 2.2 with 4.5 maps Im sure its the maps thats causing my problems with the nav i just cant find a way of deleting them or overwriting them
I found an interesting post on F150 forum where they talk about using putty to browse the sync unit and swap map images but they don't explain how
https://www.f150forum.com/f118/sync-3-t ... 7/index15/

Also they had this list of what the errors are

NAVVOICE_ERR01 - Error is NAV_VOICE_ERROR
BGMAP_ERR01 - Error is BGMAP_ERROR

LIC_ERR01 - Error is MAP_LICENSE_MISMATCH_ERROR
LIC_ERR02 - Error is LICENSE_READING_ERROR

INSTL_ERR03 - Error is SCRIPT_PERMISSION_CHANGE_ERROR
INSTL_ERR04 - Error is SCRIPT_FILE_NOT_PRESENT_ERROR
INSTL_ERR05 - Error is POPUP_UTILITY_EXECUTION_ERROR
INSTL_ERR06 - Error is IMAGE_MOVING_ERROR
INSTL_ERR07 - Error is WRITING_NAV_LICENSE_TO_DPS_ERROR
INSTL_ERR08 - Error is APPS_TOGGLE_ERROR
INSTL_ERR09 - Error is IMAGE_TOGGLE_ERROR
INSTL_ERR10 - Error is APPS_UPDATE_BOOT_ERROR
INSTL_ERR11 - Error is APPS_UPDATE_PART_ERROR
INSTL_ERR12 - Error is DIR_CREATION_ERROR
INSTL_ERR13 - Error is UNMOUNT_ERROR
INSTL_ERR14 - Error is ACTIVATION_PENDING_ERROR
INSTL_ERR15 - Error is UNABLE_TO_FIND_PASSIVE_PARTITION_ERROR

LST_ERR03 - Error is LST_ERR_NO_APPROPRIATE_SECTION
LST_ERR04 - Error is LST_ERR_NO_SECTION
LST_ERR05 - Error is LST_PKG_FILE_NOT_FOUND
LST_ERR06 - Error is LST_ERR_MALICIOUS_CHAR
LST_ERR07 - Error is LST_ERR_NO_OPEN1_PARAM
LST_ERR08 - Error is LST_ERR_OPEN_LIMIT_EXCEEDED

VER_ERR01 - Error is VER_UNABLE_TO_FIND_VER_FILE
VER_ERR02 - Error is VER_FPN_EMPTY
VER_ERR03 - Error is VER_ERR_PARSE_VER_INF
VER_ERR04 - Error is VER_FILENAME_EMPTY
VER_ERR05 - Error is VER_VIN_MISMATCH
VER_ERR06 - Error is VER_ESN_MISMATCH
VER_ERR07 - Error is VER_TIME_LIMIT_EXCEED
VER_ERR08 - Error is VER_SETTING_VER_INFO_ERROR
VER_ERR09 - Error is VER_SAVE_LOCATION_EMPTY_INVALID_ERROR
VER_ERR10 - Error is VER_FPN_VERSION_MOVING_IN_TMP_ERROR
VER_ERR11 - Error is VER_FPN_IMAGE_FILE_NOT_PRESENT
VER_ERR12 - Error is VER_FILE_HASH_VALUE_NOT_PRESENT
VER_ERR13 - Error is VER_FILE_SIZE_NOT_PRESENT
VER_ERR14 - Error is VER_PKG_TYPE_NOT_PRESENT
VER_ERR15 - Error is VER_FILE_NOT_PRESENT_TO_CALC_HASH

MEM_ERR01 - Error is MEM_NOSPACE_TO_COPY
MEM_ERR03 - Error is MEM_NOSPACE_TO_EXTRACT

PKG_ERR02 - Error is PKG_DWNLD_PKG_NOT_FOUND
PKG_ERR03 - Error is PKG_UNTAR_FAILURE
PKG_ERR04 - Error is PKG_REVOKED

SIGN_ERR01 - Error is UNSIGN_ERROR
SIGN_ERR02 - Error is SIGN_HASH_VALUE_MISMATCH
SIGN_ERR03 - Error is SIGN_CERTS_NOT_PRESENT_ON_SYNC
SIGN_ERR04 - Error is INSTALL_ERROR
SIGN_ERR05 - Error is SCRIPT_INSTALL_ERROR