UCDS not reading all modules

Resolving problems with software and hardware

Модератор: DanMc85

Ответить
PlatinumOwner
Сообщения: 7
Зарегистрирован: 21 апр 2017, 02:10

UCDS not reading all modules

Сообщение PlatinumOwner »

Hello,

I am trying to update the IPC module on a 2016 Explorer but the Update Wizard is only reading the BCM, PCM, and APIM modules. Do I need to make a setting change to read the other buses?

Thank you/

PlatinumOwner
Сообщения: 7
Зарегистрирован: 21 апр 2017, 02:10

Re: UCDS not reading all modules

Сообщение PlatinumOwner »

Update: I found that I am able to correctly read the modules when I click on "Mondeo 5"

Can you correct this in the next update so that 16MY Explorer modules are read in the same way as the Mondeo 5? This will allow me to correctly use the update wizard.

jmr061
Сообщения: 10
Зарегистрирован: 12 ноя 2016, 23:28

Re: UCDS not reading all modules

Сообщение jmr061 »

Ford never released the firmware for the 16/17 IPC on the Explorer therefore it can't be updated as of yet.

PlatinumOwner
Сообщения: 7
Зарегистрирован: 21 апр 2017, 02:10

Re: UCDS not reading all modules

Сообщение PlatinumOwner »

jmr061: Thank you, I came to the same conclusion about the IPC firmware. However the UCDS update wizard is still not working with any modules on the Explorer. It only reads them correctly when selecting Mondeo.

Аватара пользователя
kroligoff
Сообщения: 1498
Зарегистрирован: 16 янв 2013, 11:38

Re: UCDS not reading all modules

Сообщение kroligoff »

Thanks, We coming soon updated and add support for 2016+

Ответить