No Seed key found

[Johoo]

I get a No seed Key found on a G1FA-12A650-CG

SBL i use is DL3A-14C273-AC

What can i do about this to get it work?

[Johoo]

Non of the programmers can help me?

[kroligoff]

Vehicle, module, section ?

[Johoo]

Focus RS 2017

PCM module G1FA-12A650-CG

[sedde]

I have exactly the same problem, but I am tuned by mountune and we thought they changed keys on their map.

[kroligoff]

We fix it. Thnaks

[auto-hentzschel]

I also have the same issue
try to flash the PAM module with no success.
thank you!

[mikele]

auto-hentzschel
It is different one. PAM module did not send SEED to the program.
Try to reset/reboot module and try to program PAM again.

[cantaloop.li]

PAM needs 3 files for update.

[auto-hentzschel]

I'll try to flash a earlier firmware. But it will not accept. Can someone explain me how I can do that?
the reason is:
2015 Mustang Pam are possible to activate front parc sensors. But 2016+ get always an error after set the channel from 4 to 8. Front sensors don't get power from the PAM. The BCM/PAM hardware looks the same. Maybe with a other firmware I can solve this.
BTW what is the SEED key?
Thanks.

[cantaloop.li]

103628AD-958C-454C-A612-AA2830DC64D0.jpeg

I have the problem above in updating my FCIM. Update has never been possible with each UCDS version; always same error.